How To Install Your Jupiter Water Ionizer:
Melody, Microlite, Neptune, UltraTechnos, Mavello, Technos, Regency, Masterpiece, Miracle Fountain, Aqua Blue, Aquarius, Orion
1. Connecting to Your Water Supply
A. Directly to Your Faucet
Each Jupiter model comes with a Faucet Diverter which is about 1" wide and 2" high. (The exact thread size is 15/16" with 27 threads per inch and is a male fitting.)
The Diverter fits almost all standard faucets and comes with a couple of spare adaptors in case they are needed. To see how to install using a Diverter please go to http://www.ionizers.org/pdf and look at (or download) either the Melody or Microlite manual.
Each unit also comes with two lengths of plastic hosing. One piece goes from the Jupiter to the diverter and is what conveys the tap water to the Jupiter. The other is for the acid waste water and goes from the Jupiter to hang down into the sink. It usually takes only about 10 minutes to have your Jupiter up and running if this method of connection is chosen If you have a spray type faucet or some issue with space then please contact IonLife before purchasing.
B. Directly to the Cold Water Line
With the Melody, Aquarius and Orion models, only, you have the option to connect directly from Your ionizer on your counter down through the counter or sink to the cold water line.
The Melody has a water flow control knob which means you can turn the water on and off here instead of at the faucet, while the Orion and Aquarius automatically adjust the water flow.. If you simply connect your ionizer to the faucet then you would leave this knob turned on and then control the water from the faucet instead.
Although a bit more difficult than connecting directly to your faucet it is still a reasonably simple and quick installation. The easiest way is to buy a T-Junction piece from your local hardware store and a short piece of flexi hose. The flexi hose connects from your on/off valve to the T-Junction and then the 1/4" hose to your ionizer and the water line to the faucet then attaches to the T-Junction also. There is also other ways of connecting directly to the water line shown at http://www.ionizers.org
C. Under Counter Installation
With the Melody model only it is possibly to install the unit beneath the counter. This is a great option when there is no spare counter space. If unsure it is recommended that you try the Melody on your counter first as it has a base only the size of a toaster and it's quality design fits in with most kitchen decor.
To install under the counter you will also need to purchase an under sink kit for $129.
The kit comes with a quality chrome or brushed chrome faucet and clear instructions.
To see a diagrammatic please visit http://www.ionizers.org/pdf and click on 'Under Counter Kit'. Our trained technicians are also happy to help with ay questions - Toll Free 899-677-6117.
D. Special Installations
By using five gallons of bottled water you can avoid the need to connect to the faucet or cold water line.
If you wish to use water this way then IonLife offers the Flojet BW1000A Bottled Water Dispensing System.
This electric pump allows you to pump water through your Jupiter water ionizer from several feet away. All that will be required is a 1/4" hose clamp to connect your Jupiter and the Flojet BW1000A. You will need to manually operate the Flojet BW1000A and will need to turn it on and off each time you use your Jupiter.
Please note that IonLife does not assume any responsibility for the installation of any Water Ionizers it sells. Also IonLife does not assume responsibility or additional costs for the purchase of plumbing hardware expenses that may be incurred while installing your water ionizers.
|
The statements enclosed herein have not been evaluated by the Food and Drug Administration. The products mentioned on this site are not intended to diagnose, treat, cure, or prevent any disease. Information and statements made are for education purposes and are not intended to replace the advice of your family doctor.
|